Make cast resin jewelry yourself – creative ideas and tips

Cast resin jewelry-make-yourself-rings-turquoise-gold-leaf-process

There are tons of materials you can use to make beautiful accessories and jewelry yourself. Not many can be processed in such a versatile way and shaped according to your own ideas as cast resin. Small accents, whether flowers, pearls, fabric or stickers, can be worked into the product. Under the crystal-clear surface, they are not only preserved forever, but have already been implemented as a fabulous detail in the cuddly piece. In the article you will find a summary of what you need to do Cast resin jewelry produce yourself and what should be considered.

Cast Resin Jewelry – What Kind of Resin

Cast resin jewelry -do-it-yourself-instructions-wood-blue-turquoise-art

Before you start making jewelry or accessories out of cast resin, you should know that there are several types of resin. You can get epoxy resin and polyester resin in almost every craft store or hardware store. The main difference between them is the time it takes for them to cure. Both are processed by mixing the actual resin and the appropriate hardener. The mixing ratio is particularly important and you should strictly follow the instructions. A kitchen scale or measuring container can be a good possible solution. Most of the time you get the resin in a huge container and the hardener in a tiny vial. In this case, a syringe is used, with which a ml-precise dosage is possible. Optionally, you can get a resin with a 1: 1 mixing ratio. You need the same amount of hardener and resin.

Make cast resin jewelry yourself – required materials and step-by-step instructions

Cast resin jewelry-make-yourself-instructions-necessary-materials-tinker

Another difference between epoxy and polyester resin is in appearance. Epoxy resin is crystal clear and therefore better suited for making jewelry. Polyester resin hardens very quickly, is very robust and is often used for the production of molded parts – mold construction, boat construction, profile plates, etc. In addition to the casting resin, a casting mold is also required. Silicone ones, like these for baking, are best suited for this purpose.

Tinker rubber bracelets – instructions for knotting

Bracelets for women – fashionable bracelets and styling tips

Jewelry trends for the summer: these are accessories with a wow factor!

Make cast resin jewelry yourself – mix resin and hardener

Cast resin jewelry -do-it-yourself-instructions-mix-synthetic resin

The production of homemade cast resin jewelry is gradual and slow. Before you start mixing resin and hardener, you should determine how much liquid the casting mold will be filled with. First mix half the amount or less and pour it into the mold. Let rest for at least 24 hours.

Make cast resin jewelry yourself – process cast resin

Cast resin jewelry-make-your-own-mold-round

Then you can really pour everything in. Stickers, fabric, beads, flowers and even food can be poured. It is worth testing the object for pouring beforehand, as some fibers soak up the casting resin and look like water stains. It is best to seal the selected objects with napkin glue and then work them into the piece of jewelry. Some things lose their 3D effect and can only be recognized by their shape. We advise you to always do a test before starting the actual process.

Make cast resin jewelry yourself with real insects

Cast resin jewelry-make-your-own-instructions-shapes-crystal-clear

Whether you have chosen real prepared insects, flowers, glitter, pearls or simply stickers as a motif for your cast resin jewelry, the procedure is always the same. We work shift after shift. First, a small amount of casting resin is poured into the mold, allowed to harden, then the object is placed and held in position with a thin layer of resin and allowed to harden. Finally, the whole form is made full and left to rest for about 48 hours.

Cast resin jewelry with a crystal clear 3D effect


Before you take the products out of the mold, you should note that the resin should not only harden. That will be in the first 24 hours. It will be ripe in the next 24 hours, which means that it will remain stable and can therefore be processed. If you exclude the created figures, their surface will be matt because of the mold. The outer edges can also appear confusing. You can do this with the help of very fine-grain sandpaper. In order to achieve the glossy, crystal-clear effect, you should only paint the piece of jewelery.

Original cast resin jewelry with prepared insects

Cast-resin-jewelry-do-it-yourself-instructions-insects-round-pendants% cc% 88nger-chain

For a perfect finish, we recommend coating the product with epoxy resin again. It shines wonderfully and reflects the light like real glass. Before that, you need to carefully rough the surface so that the last layer can adhere to it. Otherwise it will withdraw in places and give ugly spots.

Cast resin jewelry – necklace pendant with real insect


As soon as the piece of jewelery hardens to the last layer, it can be processed. You can make a pendant on it and use it as a chain or key ring. You can also work in a nice background. Glitter is very suitable for this, but also pure acrylic paint, if the other elements would thus come into their own.

Make modern, fabulous cast resin jewelry with steampunk character yourself


All small objects, including those that are left over, are suitable for pouring into the cast resin jewelry. The parts of broken accessories can be recycled and used again as such. Steampunk jewelry and other truly unique items are also created using this technique.

Each piece of jewelry is truly unique – cast resin jewelry 


Achieve fabulous color effects when you work different materials into the same piece of jewelry. You can easily pour dried flowers, stones, shells, or photos. Just note that the paper has to be brushed with napkin glue beforehand. Otherwise the casting resin will stain the paper.

Cast resin jewelry with shimmering effects

Cast-resin-jewelry-do-it-yourself-instructions-gold-leaf-epoxy resin

If you are after metallic effects and silver & If you strive for gold, this will be achieved flawlessly. You need glitter or gold leaf or chocolate foil. You can still sprinkle glitter and glitter on top of it 3-4 hours after you have put the first layer of casting resin into the mold. They are very light in themselves and will only sink a little into the resin. heavy parts collapse because of their weight at the bottom of the mold, which is ultimately at the top of the product and therefore the desired 3D effect is not achieved.

Make cast resin jewelry yourself and incorporate golden shimmer – instructions


If you do not have gold leaf, you can simply take the chocolate foil and cut it into small pieces. Scatter them over the molds after the first layer of resin has set. With a toothpick try to bring all the particles under the surface and distribute them relatively evenly. Allow at least 24 to cure.

Multi-faceted cast resin jewelry made by yourself


You can polish the cast resin products instead of coating them with resin again. Suitable polishing pastes and very fine-grain sandpaper are suitable for this purpose. This is used to wet-polish the jewelry. When you have finished, you can attach rings, studs or clips for earrings on the back side.

Make cast resin jewelry yourself like a real professional – professional casting molds


So that your products look really professional and perfect, there are special molds for rings or chain pendants. Some of them reproduce gemstone cuts and, especially for jewelry lovers, the cast resin can be designed like a real gemstone. In addition, different colors are possible, which enormously expand the scope.

Make cast resin jewelry yourself for adventurous personalities